Fast- splicing 8s , Fast -Heating 18s
5000 times electrode life
Average loss under 0.01dB
5200mAh Battery capacity. Splicing & Heating 300 times
320X Fiber image magnification, the fiber core is clearly visible
3.5"TFT color LCD
10000 groups of fusion records ,2000 groups images ,Real times discharge processing
FTTx Fiber optic fusion splicer. Easy to operate
USB interface, Convenient for data download and software update
| Splice Method | Active Clad-Alignment |
| Applicable Fibers | SM(ITU-T G.652&G.657) / MM(ITU-T G.651) / DS(ITU-T G.653) / NZDS(ITU-T G.655) |
| Compatible Fiber/Cable | 0.25~3.0 mm / indoor cable |
| Fiber Holder | Replaceable (Universal: FH-60, SOC Holder: FH-SOC(optional)) |
| Fiber Diameter | Cladding: 80-150μm， Coating: 100~1000μm |
| Fiber Cleave Length | 8~16 mm |
| Splice mode | Max 128 modes |
| Typical Splice Loss | SM: 0.03dB / MM: 0.01dB / DS: 0.04dB / NZDS: 0.04dB / G.657: 0.03dB ★① |
| Return Loss | >>60dB |
| Splicing Time | SM Quick mode : 8 sec / SM Average: 10 Sec. |
| Estimated Splice Loss | Available |
| Heating Time | Quick mode 18 sec.(SM G652 250μm 40mm Sleeve) adjustable★② |
| Protection Sleeve Length | 20mm, 30mm, 40mm, 50mm, 60mm |
| Heat Programs | Max 32 modes |
| Battery | 5200mAh Battery Capacity, Typical 300 Cycles (Splice&Heat) per Charge ★③ |
| Electrode Life | 5000 arcs, can be extended by using an electrode grinder ★④ |
| Auto-start | Splice / Heating |
| Automatic Fiber Identification | / |
| Automatic ARC Identification | Automatic arc calibration by air pressure and temperature |
| Results Storage | The last 10,000 splice records and 2,000 result images |
| Tension Test | 1.96~2.25N |
| Operating Condition | Altitude: 0~5000m, 0~95% relative humidity, -20~50°C, Max Wind 15m/s |
| Storage Condition | 0~95% relative humidity, -20~60°C |
| Display | 3.5” color high resolution (800 x 480) display |
| Fiber Magnification | X, Y, XY, X/Y : 320X Magnification |
| Power Supply | AC Input 100-240V, DC Input 9-14V |
| Terminal | USB2.0 |
| Weight | 1.59kg without battery / 1.92kg with battery |
| Size | 155H x 138W x 145D mm (including rubber bumper) |
★① With identical fibres(in room temperature). Measured by cut-back method relevant to ITU-T and IEC standards. ★② 0.25mm fiber,may vary depending on the battery status and operating environment.
★③ Splice & Heat cycles based on 40mm shrink tube.
★④ Electrode life may vary depending on the operating environment.
Automatic splicing & automatic heating
Special 3–in–1 fiber holde
4.3-inch high definition capacitive touch screen.
7s fast fusion splicing, 18s highly efficient heating.
4.3in 480*272 HD screen
320 times magnification
